Package: bluez Priority: optional Section: admin Installed-Size: 4881 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Version: 5.66-1+rpt1+deb12u2 Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1) Depends: libasound2 (>= 1.0.17), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libglib2.0-0 (>= 2.31.8), libreadline8 (>= 6.0), libudev1 (>= 196), kmod, udev, lsb-base, default-dbus-system-bus | dbus-system-bus Pre-Depends: init-system-helpers (>= 1.54~) Suggests: pulseaudio-module-bluetooth Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3) Breaks: udev (<< 170-1) Filename: pool/sid-utils/b/bluez/bluez_5.66-1+rpt1+deb12u2_arm64.deb Size: 1615646 MD5sum: ba1e3cc75ab949a07bc45c67885984e4 SHA1: 1810f2ff8f723cff11c0b78912d1060daa86a2bb SHA256: fda0a12ce3aa4f84b6c50bf01e24ffd2e31670dfc49ebcb988756819db144c81 SHA512: 343d0605f84240d7873c80619c791b7fd350794c02bca60fcc2fb26bbe5a6b5a98981154b2506b84245145ecc55a5d2bef1a525c699aff4afe8a53eb69f898e9 Description: Bluetooth tools and daemons This package contains tools and system daemons for using Bluetooth devices. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Homepage: http://www.bluez.org Multi-Arch: foreign Package: bluez-firmware Priority: optional Section: non-free-firmware/kernel Installed-Size: 464 Maintainer: Debian Bluetooth Maintainers Architecture: all Version: 1.2-9+rpt4 Filename: pool/sid-utils/b/bluez-firmware/bluez-firmware_1.2-9+rpt4_all.deb Size: 289944 MD5sum: 5a1bb663cc7ec5b70030d896bad3346f SHA1: c122d17e907eed124869818631466080fb435ddc SHA256: 65a20f5d47314b56346e95afef26392f11c8e6f4f0de1913d04df9858b5810ae SHA512: 6f1c196d833ca5a20e7f434174f2c6b0fa71417379fed60db39f70d99a6f0f84ec74eeff0476b3670d2f7d90fe3937a7a67d29127ca4bcf987a94f48089760a4 Description: Firmware for Bluetooth devices This firmware is required for operation of Bluetooth dongles based on the Broadcom BCM203x and Raspberry Pi chipset. Package: firmware-brcm80211 Priority: optional Section: non-free-firmware/kernel Installed-Size: 20359 Maintainer: Debian Kernel Team Architecture: all Source: firmware-nonfree Version: 1:20240709-2~bpo12+1+rpt4 Suggests: initramfs-tools Filename: pool/sid-utils/f/firmware-nonfree/firmware-brcm80211_20240709-2~bpo12+1+rpt4_all.deb Size: 5923912 MD5sum: ee32f65a687b09c8ab3bf026f1f5fadb SHA1: c5bf990082dc232bacc01223d52d8ea96325d3e3 SHA256: 8983b64a215ca672d33da8af5f8bf638e8f28a4264c11d04e5c6745e9830d19d SHA512: 6b3720d7c1a8598550f70c932f4ff0dfe23ea5cc1c0efd797f5008b6148a8e9656a38635388a620b989ab640a49d3499fbff79e6890f5edcc8ec4b46b9114a70 Description: Binary firmware for Broadcom/Cypress 802.11 wireless cards This package contains the binary firmware for wireless network cards supported by the brcmsmac or brcmfmac driver. Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git Multi-Arch: foreign Package: hello Priority: optional Section: devel Maintainer: Igor Architecture: all Version: 1.0 Filename: pool/sid-utils/h/hello/example.deb Size: 740 MD5sum: 09aed213b919538fe38e7e0c9a40f4da SHA1: 62fae99e3c9a4f099bbed454eb92799ab708d107 SHA256: be3ef1db3700e1606c07fce9c5f3937a6deb28b77feaa7934664e4871c07b56c SHA512: 1adeeee086741f2e46d3554b92956b905ad55107d9967c495f2bc4656f6b2df06ea58b13022f8a331cf120484bcb861c9986f3db1e82c8a3ec728c39cbd704db Description: example package Package: pi-bluetooth Priority: optional Section: misc Installed-Size: 28 Maintainer: Serge Schneider Architecture: all Version: 0.1.20 Depends: bluez (>= 5.50-1.2~deb10u1+rpt1), bluez-firmware, raspberrypi-sys-mods Filename: pool/sid-utils/p/pi-bluetooth/pi-bluetooth_0.1.20_all.deb Size: 5488 MD5sum: 656726fbbfef2235c76201e097678c80 SHA1: 968c9e4ae2fea32b2bfc80816bf104f3104cccb1 SHA256: e2d81ed46e01ba45182949cf6b9235d5998876648ebbfcfbe27213f912278f7f SHA512: 72888e6b1934f427c255cefb2333632ff3ee88e9867264403f8e7937af2c04afefcfcdfba2a1bed70060a3b1425e9378e2988a0e62a10204ea43b90409584bda Description: Raspberry Pi 3 bluetooth Loads BCM43430A1 firmware on boot Homepage: https://github.com/RPi-Distro/pi-bluetooth Package: raspberrypi-sys-mods Priority: optional Section: admin Installed-Size: 117 Maintainer: Serge Schneider Architecture: arm64 Version: 20250930~bookworm Replaces: raspberrypi-ui-mods (<< 1.20210706) Depends: systemd (>= 230), gettext-base, raspi-config (>= 20220809), parted, fdisk, whiptail, uuid Recommends: rfkill, rpi-eeprom, ssh-import-id, userconf-pi, python3, python3-toml Breaks: raspberrypi-ui-mods (<< 1.20210706) Filename: pool/sid-utils/r/raspberrypi-sys-mods/raspberrypi-sys-mods_20250930~bookworm_arm64.deb Size: 22044 MD5sum: 348d30ab71b1ea1b6391e7b3e6eed205 SHA1: b2376498cd53bf9064eb2abc6ec1d7101ec1468f SHA256: 647bdf4783a2ce3bc1e85f36676438e1bf54d8f3470258e837ca7c8e8a8135ad SHA512: 281b51a7aaea6ee1a9a8c6f7c561070192ed657484ff70295948139128739da85d547b1a781bf729e98e0c29211652f89d7454848b7c4724f8db220f93ad751a Description: System tweaks for the Raspberry Pi Various modifications to improve the performance or user experience. Homepage: https://github.com/RPi-Distro/raspberrypi-sys-mods Package: raspi-firmware Priority: optional Section: non-free-firmware/misc Installed-Size: 22140 Maintainer: Serge Schneider Architecture: all Version: 1:1.20250915-1~bookworm Replaces: linux-firmware-raspi3 (<< 1.20161123-2), raspi3-firmware (<< 1.20190718-1~) Depends: dosfstools, rsync Pre-Depends: dpkg (>= 1.17.14) Suggests: firmware-brcm80211, firmware-misc-nonfree, bluez-firmware Breaks: linux-firmware-raspi3 (<< 1.20161123-2), raspi3-firmware (<< 1.20190718-1~) Filename: pool/sid-utils/r/raspi-firmware/raspi-firmware_1.20250915-1~bookworm_all.deb Size: 13024580 MD5sum: 36a99a44706121409420769f53451370 SHA1: 84f4e133b75aba8d03982ea51bb4c33f86e1c96c SHA256: 7345483cbc01094af63c69e2e9f0856601e5cbf4493eee4c7fe2d3ac8618dd82 SHA512: 3c6b18438afe38d94a98206173b3512bddb5c6d7fa1e4ba2cba9d81336ba0d68c311326bb518b12f120be6a5329597f05d3abfa0d341d0fc505635ba202c3476 Description: Raspberry Pi family GPU firmware and bootloaders This package contains all the proprietary files necessary to boot a Raspberry Pi board. Homepage: https://github.com/raspberrypi/firmware Package: raspi-gpio Priority: optional Section: utils Installed-Size: 82 Maintainer: Serge Schneider Architecture: arm64 Version: 0.20231127 Depends: libc6 (>= 2.34) Filename: pool/sid-utils/r/raspi-gpio/raspi-gpio_0.20231127_arm64.deb Size: 11876 MD5sum: f932af07673d1344c2c43102ef5e6d20 SHA1: 9c15055b19a7f01e1eaa32a088c0a075c80b83ce SHA256: 06a6977731ab6029f34ffb3e89290546d74fb26f7f19ef713b9fd45437e87b72 SHA512: 57d57db9e53b93a67d05039e4e2c9ecc823b707caa53d311e1228f8e9c9a5863fe18642e9b98c75fb495dbda4179c7281bec3e97195b001e8b3a9860102f5d74 Description: Dump the state of the BCM270x GPIOs This tool prints out one line per BCM270x GPIO pin giving the current value on the pin, and the function it is currently set to in the GPFSELx registers. Homepage: https://www.raspberrypi.com/ Package: raspi-utils Priority: optional Section: utils Installed-Size: 14 Maintainer: Serge Schneider Architecture: all Version: 20251002-1~bookworm Depends: raspi-utils-core, raspi-utils-otp, raspi-utils-dt, raspi-utils-eeprom, raspinfo (>= 20240402-4) Filename: pool/sid-utils/r/raspi-utils/raspi-utils_20251002-1~bookworm_all.deb Size: 6720 MD5sum: 8b640fdfa0b724b25dbaa81dfe3ab08d SHA1: 3e7204aa3ac9b2d8f0aec2f781d5ed8409884f28 SHA256: a2ce14ad43d084d4fbf2b02646bbf9431227d422aa3865272339842f1df6e748 SHA512: e63051c48e3c0922b66ae25590c987b29743d0db3e800f76ef48b2532064124032f2fb73b1eabb41eb6a9f8c926923a1654f9f95eb64bbcd042f1c3071d5dbc5 Description: Collection of scripts and simple applications This is a meta-package that installs all of utilities Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-core Priority: optional Section: utils Installed-Size: 307 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20251002-1~bookworm Replaces: libraspberrypi-bin, raspi-utils (<< 20240402-4) Depends: libc6 (>= 2.34), libgpiolib0 (>= 20250514) Breaks: libraspberrypi-bin, raspi-utils (<< 20240402-4) Filename: pool/sid-utils/r/raspi-utils/raspi-utils-core_20251002-1~bookworm_arm64.deb Size: 40176 MD5sum: 6ceecb1b7887c758ad09afe14ee4ef52 SHA1: 3e7b6caebdab4a5eeac9a9a9bd7c832187e76a2c SHA256: dba9d03cfbe7d151f6682efe86cc5ebf36a303c3996cac693076795be4699244 SHA512: 7f53fd483d9b35fa0a5d394a4817bcef6bb794d5bc653ab003cffba5e44310ba21874126e31acdd0c3342df90b0d251dca2cbf9d621e0cbe9494fd9dfeea8c92 Description: Collection of scripts and simple applications vclog - A tool to get VideoCore 'assert' or 'msg' logs with optional -f to wait for new logs to arrive pinctrl - A tool for displaying and modifying the GPIO and pin muxing state of a system, bypassing the kernel. vcgencmd - A tool to get various bits of information from the VideoCore vcmailbox - A tool to send a message to the VideoCore Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-dt Priority: optional Section: utils Installed-Size: 237 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20251002-1~bookworm Replaces: libraspberrypi-bin, ovmerge (<< 20230123-1), raspi-utils (<< 20240402-4) Depends: perl:any, libc6 (>= 2.34), libdtovl0 (>= 20250514), libfdt1 (>= 1.6.1), device-tree-compiler Breaks: libraspberrypi-bin, ovmerge (<< 20230123-1), raspi-utils (<< 20240402-4) Filename: pool/sid-utils/r/raspi-utils/raspi-utils-dt_20251002-1~bookworm_arm64.deb Size: 52142 MD5sum: f27148f232dde4439a13dc1b1e2ba12f SHA1: 419e8dc234b5935f038df43837074f6e12628374 SHA256: 55976f79397dc782eac15958ff75dd121f3e9d1bb2f579877dcd9abe2f45b649 SHA512: 85dc19e80ede623ab3981e89836281d24f463dee03909f2afc356b23f14286d5a1c9b8db31959c25a153bd40147daf3fb550ce005c952991d573d112e59c0b4f Description: Device Tree overlay utilities dtmerge - A tool for applying compiled DT overlays (*.dtbo) to base Device Tree files (*.dtb) overlaycheck - A tool for validating the overlay files and README in a kernel source tree ovmerge - A tool for merging DT overlay source files (*-overlay.dts), flattening and sorting .dts files for easy comparison, displaying the include tree, etc Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-eeprom Priority: optional Section: utils Installed-Size: 154 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20251002-1~bookworm Replaces: raspi-utils (<< 20240402-4) Depends: libc6 (>= 2.34) Breaks: raspi-utils (<< 20240402-4) Filename: pool/sid-utils/r/raspi-utils/raspi-utils-eeprom_20251002-1~bookworm_arm64.deb Size: 26190 MD5sum: a29132bccd34748603d2622e7284ee6b SHA1: d78adcbf9122d4c983dd292b99c9a693743d5c56 SHA256: 9ac160d61dcd18c1cf24338508dfd1848eb22ff950d4753441d0fd8bc3b44a52 SHA512: af4b53611bdf5b549fe7ebdca759fb3915db16001c2229c5df5e11a59622accadbd11c367c3235294bb078b2a81cb986d3ec1beff387dda95abd740402f37967 Description: Tools for creating and managing EEPROMs for HAT+ and HAT board Tools for building, flashing and reading Raspberry Pi HAT+ and HAT .eep files Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-otp Priority: optional Section: utils Installed-Size: 21 Maintainer: Serge Schneider Architecture: all Source: raspi-utils Version: 20251002-1~bookworm Replaces: raspi-utils (<< 20240402-4) Depends: python3:any Breaks: raspi-utils (<< 20240402-4) Filename: pool/sid-utils/r/raspi-utils/raspi-utils-otp_20251002-1~bookworm_all.deb Size: 9152 MD5sum: 9804204e7b2767622aac6c9a43b40fc3 SHA1: dcb3dbdb6e03e6a1202c4ee9051691f586f62624 SHA256: c150d9e213a6919626de10a7a48ac9da00d2c583c50f801e10ff9698f91d75f5 SHA512: c82c2719cbcfe60d0dfc5ab88b6c39906cb65bd8e8f51e550db19346e6db12aad487079fee8e9dc7cba04873ba796c0a2f61b5fa3631cf88dcd20bedacd1d8b1 Description: Tools for reading and setting Raspberry Pi OTP bits A short script to help with reading and setting the customer OTP bits Homepage: https://github.com/raspberrypi/utils Package: raspinfo Priority: optional Section: utils Installed-Size: 21 Maintainer: Serge Schneider Architecture: all Source: raspi-utils Version: 20251002-1~bookworm Replaces: raspi-utils (<< 20240402-4) Depends: raspi-utils-core, net-tools, kms++-utils, rpi-eeprom, sudo, usbutils Recommends: pastebinit Breaks: raspi-utils (<< 20240402-4) Filename: pool/sid-utils/r/raspi-utils/raspinfo_20251002-1~bookworm_all.deb Size: 8824 MD5sum: dffc674cf55e3252c0e4f13383f7b87e SHA1: f27651a347268509f5ff085d8ec86a85ed4fc506 SHA256: 3157d900403ef168b2f20ebcbc37ec2e38bd887cc7dfe45d4e237b587db82225 SHA512: 1b199fbf97c5fca36fd88c65c6a796d566425f8749f3f0ade03297756046dff3d4450d21d28340344aa12e59a76cf42aae8355e383f60dca3fa21f4574a5b0bf Description: Prints information about the Raspberry Pi for bug reports A short script to dump information about the Pi. Intended for the submission of bug reports Homepage: https://github.com/raspberrypi/utils