MESON(1)

NAME
meson - a high productivity build system

DESCRIPTION
Meson is a build system designed to optimize programmer productivity. It aims to do this by providing simple, out-of-the-box support for modern software development tools and practices, such as unit tests, coverage reports, Valgrind, Ccache and the like. The main Meson executable provides many subcommands to access all the functionality.

The setup command
Using Meson is simple and follows the common two-phase process of most build systems. First you run Meson to configure your build: meson setup [ options ] [ build directory ] [ source directory ] Note that the build directory must be different from the source directory. Meson does not support building inside the source directory and attempting to do that leads to an error. After a successful configuration step you can build the source by running the actual build command in the build directory. The default backend of Meson is Ninja, which can be invoked like this. ninja [ target ] You only need to run the Meson command once: when you first configure your build dir. After that you just run the build command. Meson will autodetect changes in your source tree and regenerate all files needed to build the project. Meson includes many built-in options that can be used to tweak the configuration of a build directory; projects can also add their own options. To set values for the options, use the -D command line argument like this: meson setup -Dopt1=value1 -Dopt2=value2 rest of the command line...

  options:

--version
    print version number

--help
    print command line help

The configure command
meson configure provides a way to configure a Meson project from the command line. Its usage is simple: meson configure [ build directory ] [ options to set ] If build directory is omitted, the current directory is used instead. If no parameters are set, meson configure will print the value of all build options to the console. To set values, use the -D command line argument like this. meson configure -Dopt1=value1 -Dopt2=value2

The dist command
meson dist generates a release archive. meson dist [ options ]

  options:

-h, --help
    show this help message and exit

-C WD
    directory to cd into before running

--allow-dirty
    Allow even when repository contains uncommitted changes.

--formats FORMATS
    Comma separated list of archive types to create. Supports xztar (default), gztar, and zip.

--include-subprojects
    Include source code of subprojects that have been used for the build.

--no-tests
    Do not build and test generated packages.

The install command
meson install installs the project. meson install [ options ]

  options:

-h, --help
    show this help message and exit

-C WD
    directory to cd into before running

--no-rebuild
    Do not rebuild before installing.

--only-changed
    Only overwrite files that are older than the copied file.

--quiet
    Do not print every file that was installed.

--destdir DESTDIR
    Sets or overrides DESTDIR environment. (Since 0.57.0)

--dry-run, -n
    Doesn't actually install, but print logs. (Since 0.57.0)

--skip-subprojects [SKIP_SUBPROJECTS]
    Do not install files from given subprojects. (Since 0.58.0)

--tags TAGS
    Install only targets having one of the given tags. (Since 0.60.0)

--strip
    Strip targets even if strip option was not set during configure. (Since 0.62.0)

The introspect command
Meson introspect is a command designed to make it simple to integrate with other tools, such as IDEs. The output of this command is in JSON. meson introspect [ build directory ] [ option ] If build directory is omitted, the current directory is used instead.

  options:

--targets
    print all top level targets (executables, libraries, etc)

--target-files
    print the source files of the given target

--buildsystem-files
    print all files that make up the build system (meson.build, meson.options, meson_options.txt etc)

--tests
    print all unit tests

--help
    print command line help

The init command
meson init creates a new project meson init [ options ] [ sourcefile... ]

  positional arguments:

sourcefile...
    source files. default: all recognized files in current directory

  options:

-h, --help
    show this help message and exit

-C WD
    directory to cd into before running

-n NAME, --name NAME
    project name. default: name of current directory

-e EXECUTABLE, --executable EXECUTABLE
    executable name. default: project name

-d DEPS, --deps DEPS
    dependencies, comma-separated

-l {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust,vala}, --language {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust,vala}
    project language. default: autodetected based on source files

-b, --build
    build after generation

--builddir BUILDDIR
    directory for build

-f, --force
    force overwrite of existing files and directories.

--type {executable,library}
    project type. default: executable based project

--version VERSION
    project version. default: 0.1

The test command
meson test is a helper tool for running test suites of projects using Meson. The default way of running tests is to invoke the default build command: ninja [ test ] meson test provides a richer set of tools for invoking tests. meson test automatically rebuilds the necessary targets to run tests when used with the Ninja backend. Upon build failure, meson test will return an exit code of 125. This return code tells git bisect run to skip the current commit. Thus bisecting using git can be done conveniently like this. git bisect run meson test -C build_dir

  options:

--repeat
    run tests as many times as specified

--gdb
    run tests under gdb

--list
    list all available tests

--wrapper
    invoke all tests via the given wrapper (e.g. valgrind)

-C  Change into the given directory before running tests (must be root of build directory).

--suite
    run tests in this suite

--no-suite
    do not run tests in this suite

--no-stdsplit
    do not split stderr and stdout in test logs

--benchmark
    run benchmarks instead of tests

--logbase
    base of file name to use for writing test logs

--num-processes
    how many parallel processes to use to run tests

--verbose
    do not redirect stdout and stderr

-t  a multiplier to use for test timeout values (usually something like 100 for Valgrind)

--setup
    use the specified test setup --slice SLICE/NUM_SLICES Split tests into NUM_SLICES slices and execute slice number SLICE. (Since 1.8.0)

The wrap command
Wraptool is a helper utility to manage source dependencies using the online wrapdb service. meson wrap < command > [ options ] You should run this command in the top level source directory of your project.

  Commands:

list
    list all available projects

search
    search projects by name

install
    install a project with the given name

update
    update the specified project to latest available version

info
    show available versions of the specified project

status
    show installed and available versions of currently used subprojects

The subprojects command
meson subprojects is used to manage subprojects. meson subprojects [ options ] [ command ]

  options:

-h, --help
    show this help message and exit

  commands:

update
    Update all subprojects from wrap files

checkout
    Checkout a branch (git only)

download
    Ensure subprojects are fetched, even if not in use. Already downloaded subprojects are not modified. This can be used to pre-fetch all subprojects and avoid downloads during configure.

foreach
    Execute a command in each subproject directory.

purge
    Remove all wrap-based subproject artifacts

packagefiles
    Manage the packagefiles overlay

The rewrite command
meson rewrite modifies the project definition. meson rewrite [ options ] [ command ]

  options:

-h, --help
    show this help message and exit

-s SRCDIR, --sourcedir SRCDIR
    Path to source directory.

-V, --verbose
    Enable verbose output

-S, --skip-errors
    Skip errors instead of aborting

  commands:

target (tgt)
    Modify a target

kwargs
    Modify keyword arguments

default-options (def)
    Modify the project default options

command (cmd)
    Execute a JSON array of commands

The compile command
meson compile builds the project. meson compile [ options ] [ TARGET... ]

  positional arguments:

TARGET
    Targets to build. Target has the following format: [PATH_TO_TARGET/]TARGET_NAME.TARGET_SUFFIX[:TARGET_TYPE].

  options:

-h, --help
    show this help message and exit

--clean
    Clean the build directory.

-C WD
    directory to cd into before running

-j JOBS, --jobs JOBS
    The number of worker jobs to run (if supported). If the value is less than 1 the build program will guess.

-l LOAD_AVERAGE, --load-average LOAD_AVERAGE
    The system load average to try to maintain (if supported).

-v, --verbose
    Show more verbose output.

--ninja-args NINJA_ARGS
    Arguments to pass to `ninja` (applied only on `ninja` backend).

--vs-args VS_ARGS
    Arguments to pass to `msbuild` (applied only on `vs` backend).

--xcode-args XCODE_ARGS
    Arguments to pass to `xcodebuild` (applied only on `xcode` backend).

The devenv command
meson devenv runs commands in the developer environment. meson devenv [ options ] [ command ]

  positional arguments:

command
    Command to run in developer environment (default: interactive shell)

  options:

-h, --help
    show this help message and exit

-C BUILDDIR
    Path to build directory

--workdir WORKDIR, -w WORKDIR
    Directory to cd into before running (default: builddir, Since 1.0.0)

--dump [DUMP]
    Only print required environment (Since 0.62.0) Takes an optional file path (Since 1.1.0)

--dump-format {sh,export,vscode}
    Format used with --dump (Since 1.1.0)

The env2mfile command
meson env2mfile converts the current environment to a cross or native file. meson env2mfile [ options ]

  options:

-h, --help
    show this help message and exit

--debarch DEBARCH
    The dpkg architecture to generate.

--gccsuffix GCCSUFFIX
    A particular gcc version suffix if necessary.

-o OUTFILE
    The output file.

--cross
    Generate a cross compilation file.

--native
    Generate a native compilation file.

--system SYSTEM
    Define system for cross compilation.

--subsystem SUBSYSTEM
    Define subsystem for cross compilation.

--kernel KERNEL
    Define kernel for cross compilation.

--cpu CPU
    Define cpu for cross compilation.

--cpu-family CPU_FAMILY
    Define cpu family for cross compilation.

--endian {big,little}
    Define endianness for cross compilation.

The format command
meson format formats a meson source file. meson format [ options ] [ sources... ]

  positional arguments:

sources...
    meson source files

  options:

-h, --help
    show this help message and exit

-q, --check-only
    exit with 1 if files would be modified by meson format

-i, --inplace
    format files in-place

-r, --recursive
    recurse subdirs (requires --check-only or --inplace option)

-c meson.format, --configuration meson.format
    read configuration from meson.format

-e, --editor-config
    try to read configuration from .editorconfig

-o OUTPUT, --output OUTPUT
    output file (implies having exactly one input)

When no command is specified
If you run Meson without a subcommand, it will assume you meant meson setup. However, this syntax is deprecated, and Meson will print a warning message if it is used. You should always use meson setup explicitly, instead of relying on the default.

EXIT STATUS

0   Successful.

1   Usage error, or an error parsing or executing meson.build.

2   Internal error.

125 meson test could not rebuild the required targets.

SEE ALSO
https://mesonbuild.com/
    https://wrapdb.mesonbuild.com/ meson-reference(3)