This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

• VF FLR would get stuck when its PF triggered the FLR as well.
• Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).

Firmware Dependencies:

Problems Fixed:

Addressed an issue where System Information\Device Inventory in ILO web may show unknown entries after enabling bifurcation.

Addressed an issue where One button secure erase (OBSE) report may show incorrectDrive Port Number and Box Number for MicroChip SR controller.

Addressed an issue where system may become stuck after enrolling many certificates and signatures.

Known Issues:

Firmware Dependencies:

Problems Fixed:

Addressed an issue where system may hang while resetting the system.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue where NVMe hot plug function may fail in VMWare when the GPU riser was installed.

Addressed an issue where duplicated and incorrect task status was logged iLO Event Log.

Addressed an issue where multiple KEK instances were displayed after enrollment of KEK certificate from Redfish API.

Addressed an issue where dbr was not deleted after deleting all keys via Redfish API.

Known Issues:

• Initial release

• Initial release

• Congestion Control malfunctioned due to an invalid database.
• PLDM command Get Schema URI failed to function properly when there were no base RDE resource IDs.
• RDE Port resource failed to show 400Gb speed in CapableLinkSpeedGbps and in MaxSpeedGbps in some InfiniBand cards.
• Fixed a performance issue by enabling CC to allow queues to receive fair bandwidth.
• VF FLR would get stuck when its PF triggered the FLR as well.

• Congestion Control did not work as expected when Global Route Headers (GRH) was used in traffic of an IB cluster.
• SPDM requests received when CPLD burn flow in progress were answered with incorrect responses.
• When ConnectX-7 adapter card was configured to use the Auto-Negotiation mode, 400G_8x linkup could not be raised.
• When performing a stress toggling on a ConnectX-7 adapter card that was connected to P65334-B21 cable and the speed is set to 100G_1x with interleaved FEC, a long linkup time of up to 5 minutes occurred.
• When raising a link using 200G optical cables while connecting a ConnectX-7 to a ConnectX-7, raising a link with width less than the maximum provided by the cable with speed 25G lane was not supported.
• When raising a link using 400G optical cables while connecting a ConnectX-7 to a ConnectX-7, raising a link with width less than the maximum provided by the cable with speed 50G or 25G lane was not supported.
• WoL packets did not work properly if sent to Unicast destination MAC.
• When performing PCIe link secondary-bus-reset, disable/enable or mlxfwreset on AMD based Genoa systems, the device took longer then expected to link up, due to a PCIe receiver termination misconfiguration.
• Disabling the Relaxed Ordered (RO) capability (relaxed_ordering_read_pci_enabled=0) using the vhca_resource_manager was not functional.
• In rare cases, linkup time of NDR and NDR200 with P49764-B21 transceiver took longer than 60 seconds.
• Selective-Repeat configuration issue which occasionally caused retransmission to wait for timeout instead of out-of-sequence NACK.
• The secondary ASIC run module init failed due to missing condition.
• The adapter cards' quad ports were kept UP when using breakout cables / QSFP-split-4.
• A rare race condition in NODNIC teardown that caused commands to hang on regular PF.

• An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
• The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
• An IPSec issue that resulted in Crypto offload getting disabled.
• Memory corruption issue when running XDP traffic.
• IFA packets were sent from the incorrect port on VF LAG.
• An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
• In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
• PFC configuration was reset when updating the cable length via mlnx_qos.

• An error was triggered in case devlink reload was attempted when there were allocated subfunctions.
• Changing the steering mode to firmware steering was unsupported for policy IPsec rules.

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where a NVMe drive would not be unmounted when it exceeds the DPC error threshold with ESXi 8.0U2 or newer versions.

Addressed an issue where system would not be configured as 4 sub-NUMA nodes per socket (SNC4) when Virtual NUMA is enabled and SNC2 is enabled.

Addressed an issue where updating NVMe-oF initiator name would not take effect.

Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword were not working.

Known Issues:

• Performance issues were observed due to context switches over the hardware priority buffers that caused slower packet being sent when sending traffic with many different VLAN (CoS PCP/801.2p) priorities. To fix the issue, the driver provides a new module parameter trust_dscp_same_priority to map all DSCP priorities to the same traffic class to avoid such behavior.
• A specific steering rule creation issue when the teaming mode is on.
• Packets were dropped by ENS that were not set as MARK. Now MARK actions are available in both LAG and no LAG modes.

• Fixed an issue that caused a ParaVirtual VM to lose traffic after resuming from the suspend mode when SR-IOV was enabled in the system.
• Cleaned steering rule from FDB when VF is being quiesced.
• Fixed an issue that caused the driver to configure the incorrect SL value for RoCE with RDMACM.

• GTP length field was automatically modified at the TX side when an incorrect or invalid length was detected.
• Switch port would go down due to MC packets mirrored back to the switch when in promiscuous mode.
• Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
• The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
• Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

• Migration data corruption occurred when running parallel save_vhca_state/load_vhca_state commands on the same PF.

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS should be paired with System ROM 1.50 (05/16/2024) or later.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Intel(R) SPS Firmware may assign duplicate MCTP EIDs for adapters.

Known Issues:

None

This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS should be paired with System ROM 1.50 (05/16/2024) or later.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Intel(R) SPS Firmware may assign duplicate MCTP EIDs for adapters.

Known Issues:

None

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

• Fixed the issue where AMS was crashing after plugging and removing a USB drive

• An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
• The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
• An IPSec issue that resulted in Crypto offload getting disabled.
• Memory corruption issue when running XDP traffic.
• IFA packets were sent from the incorrect port on VF LAG.
• An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
• In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
• PFC configuration was reset when updating the cable length via mlnx_qos.

• An error was triggered in case devlink reload was attempted when there were allocated subfunctions.
• Changing the steering mode to firmware steering was unsupported for policy IPsec rules.

• Fixed the issue where AMS was crashing after plugging and removing a USB drive

• Congestion Control malfunctioned due to an invalid database.
• PLDM command Get Schema URI failed to function properly when there were no base RDE resource IDs.
• RDE Port resource failed to show 400Gb speed in CapableLinkSpeedGbps and in MaxSpeedGbps in some InfiniBand cards.
• Fixed a performance issue by enabling CC to allow queues to receive fair bandwidth.
• VF FLR would get stuck when its PF triggered the FLR as well.

• Congestion Control malfunctioned due to an invalid database.
• PLDM command Get Schema URI failed to function properly when there were no base RDE resource IDs.
• RDE Port resource failed to show 400Gb speed in CapableLinkSpeedGbps and in MaxSpeedGbps in some InfiniBand cards.
• Fixed a performance issue by enabling CC to allow queues to receive fair bandwidth.
• VF FLR would get stuck when its PF triggered the FLR as well.

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after enrollment of KEK certificate from Redfish API.

Addressed an issue where dbr were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configurating bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certfifcate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

Addressed an issue where updating NVMe-oF initiator name would not take effect.

Known Issues:

Firmware Dependencies:

Problems Fixed:

Addressed an issue where system may hang while enrolling secure boot key dbr certificate via Redfish API.

Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

Known Issues:

• An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
• The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
• An IPSec issue that resulted in Crypto offload getting disabled.
• Memory corruption issue when running XDP traffic.
• IFA packets were sent from the incorrect port on VF LAG.
• An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
• In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
• PFC configuration was reset when updating the cable length via mlnx_qos.

• An error was triggered in case devlink reload was attempted when there were allocated subfunctions.
• Changing the steering mode to firmware steering was unsupported for policy IPsec rules.

This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS should be paired with System ROM 1.50 (05/16/2024) or later.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Intel(R) SPS Firmware may assign duplicate MCTP EIDs for adapters.

Known Issues:

None

This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS should be paired with System ROM 1.50 (05/16/2024) or later.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Intel(R) SPS Firmware may assign duplicate MCTP EIDs for adapters.

Known Issues:

None

Fixes included in version 1.12.0:

• Fixed race condition between BIOS checking link status and LNI completing which resulted in PXE boot failures.
• Changed the default behavior of the hfi1_eprom tool to convert the eprom format to version 2, eliminating the need to supply the -N command line argument.
• Addressed an issue where updating the HfiPcieGen3Loader*.rom file could result in the erasure of HfiPcieGen3Loader*.efi and HFI_TYPE1*.dat files.

• Fixed race condition between BIOS checking link status and LNI completing which resulted in PXE boot failures.
• Changed the default behavior of the hfi1_eprom tool to convert the eprom format to version 2, eliminating the need to supply the -N command line argument.
• Addressed an issue where updating the HfiPcieGen3Loader*.rom file could result in the erasure of HfiPcieGen3Loader*.efi and HFI_TYPE1*.dat files.

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

• The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

• The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

• Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

• If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

None

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter performance degradation and TSC instability issues.

Addressed an issue where Redfish BIOS actions, Reset BIOS and Change Password may not work.

Addressed an issue where duplicated and incorrect task statuses were logged in iLO Event Log when enrolling duplicated keys via Redfish API.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate via Redfish API.

Addressed an issue where dbr was not deleted after deleting all keys via Redfish API

Addressed an issue where TPM PCR0 may change after modifying some RBSU knobs.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configurating bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controller.

Addressed an issue that Battery Failure IML message may be incorrectly logged for MR Controller with Smart Storage Battery.

Addressed a secure boot database synchronizing issue when managing secure boot keys via Redfish API.

Addressed an issue where TPM PCR0 may change after swapping ROM in iLO web.

Addressed an issue where CPU max speed was incorrect in SMBIOS Type 4.

Addressed an issue where unsupported NPS mode was shown for certain CPUs.

Known Issues:

None

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

• GTP length field was automatically modified at the TX side when an incorrect or invalid length was detected.
• Switch port would go down due to MC packets mirrored back to the switch when in promiscuous mode.
• Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
• The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
• Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

• GTP length field was automatically modified at the TX side when an incorrect or invalid length was detected.
• Switch port would go down due to MC packets mirrored back to the switch when in promiscuous mode.
• Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
• The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
• Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

• Fixed OID name hrSystemUptime is reported incorrectly

This version of the System ROM contains updates aligned with the Intel uPLR2 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024).

Firmware Dependencies:

iLO6 v1.62 is NOT compatible with the Windows and Linux System ROM Smart Flash Components for versions of the System ROM prior to v2.30.  The System ROM Smart Flash Components released with System ROM v2.30 will work with iLO6 v1.62.  For any systems utilizing iLO6 v1.62 or later, flashing the System ROM to versions prior to v2.30 requires utilizing Fwpkg or ROM binary instead of using the Windows or Linux Smart Flash Components.

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate from Redfish API.

Addressed an issue where UEFI secure boot dbr signatures were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configuring bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controllers.

Addressed an issue where Redfish BIOS actions, ResetBios and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where an error message is displayed with 12-DIMM per CPU and DIMM rank mixing for unsupported DIMM configurations.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for Smart Array Controller with Smart Storage Battery.

Addressed an issue where NS204i may not be identified as an NVMe device.

Addressed an issue when setting "Workload Profile" to 'Custom' and changing "Processor Monitor/Mwait Support" to 'Disabled'. "Processor Monitor/Mwait Support" knob is not seen in the BIOS->Service Options.

Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

Known Issues:

None

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter performance degradation and TSC instability issues.

Addressed an issue where Redfish BIOS actions, Reset BIOS and Change Password may not work.

Addressed an issue where duplicated and incorrect task statuses were logged in iLO Event Log when enrolling duplicated keys via Redfish API.

Addressed an issue where multiple KEK instances appeared after the enrollment of KEK certificate via Redfish API.

Addressed an issue where dbr was not deleted after deleting all keys via Redfish API

Addressed an issue where TPM PCR0 may change after modifying some RBSU knobs.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configurating bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certificate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of MR controller.

Addressed an issue that Battery Failure IML message may be incorrectly logged for MR Controller with Smart Storage Battery.

Addressed a secure boot database synchronizing issue when managing secure boot keys via Redfish API.

Addressed an issue where TPM PCR0 may change after swapping ROM in iLO web.

Addressed an issue where CPU max speed was incorrect in SMBIOS Type 4.

Addressed an issue where unsupported NPS mode was shown for certain CPUs.

Known Issues:

None

• DFC idx not updated
• unexpected checksum error

• DFC idx not updated
• unexpected checksum error

* The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented

The following fixes were incorporated in this version:

• Code optimization to save memory repo.

• TLB exception seen while doing esp reset when expander reset was in progress.

• Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

• Added whole new Delta PS-pmbus code , Updated the ESP version number.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

• Congestion Control malfunctioned due to an invalid database.
• PLDM command Get Schema URI failed to function properly when there were no base RDE resource IDs.
• RDE Port resource failed to show 400Gb speed in CapableLinkSpeedGbps and in MaxSpeedGbps in some InfiniBand cards.
• Fixed a performance issue by enabling CC to allow queues to receive fair bandwidth.
• VF FLR would get stuck when its PF triggered the FLR as well.

• Congestion Control did not work as expected when Global Route Headers (GRH) was used in traffic of an IB cluster.
• SPDM requests received when CPLD burn flow in progress were answered with incorrect responses.
• When ConnectX-7 adapter card was configured to use the Auto-Negotiation mode, 400G_8x linkup could not be raised.
• When performing a stress toggling on a ConnectX-7 adapter card that was connected to P65334-B21 cable and the speed is set to 100G_1x with interleaved FEC, a long linkup time of up to 5 minutes occurred.
• When raising a link using 200G optical cables while connecting a ConnectX-7 to a ConnectX-7, raising a link with width less than the maximum provided by the cable with speed 25G lane was not supported.
• When raising a link using 400G optical cables while connecting a ConnectX-7 to a ConnectX-7, raising a link with width less than the maximum provided by the cable with speed 50G or 25G lane was not supported.
• WoL packets did not work properly if sent to Unicast destination MAC.
• When performing PCIe link secondary-bus-reset, disable/enable or mlxfwreset on AMD based Genoa systems, the device took longer then expected to link up, due to a PCIe receiver termination misconfiguration.
• Disabling the Relaxed Ordered (RO) capability (relaxed_ordering_read_pci_enabled=0) using the vhca_resource_manager was not functional.
• In rare cases, linkup time of NDR and NDR200 with P49764-B21 transceiver took longer than 60 seconds.
• Selective-Repeat configuration issue which occasionally caused retransmission to wait for timeout instead of out-of-sequence NACK.
• The secondary ASIC run module init failed due to missing condition.
• The adapter cards' quad ports were kept UP when using breakout cables / QSFP-split-4.
• A rare race condition in NODNIC teardown that caused commands to hang on regular PF.

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after enrollment of KEK certificate from Redfish API.

Addressed an issue where dbr were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configurating bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certfifcate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

Addressed an issue where updating NVMe-oF initiator name would not take effect.

Known Issues:

Firmware Dependencies:

Problems Fixed:

Addressed an issue where duplicated and incorrect task status were logged iLO Event Log.

Addressed an issue where multiple KEK instances appeared after enrollment of KEK certificate from Redfish API.

Addressed an issue where dbr were not deleted after deleting all keys via Redfish API.

Addressed an issue where Negotiated Link Width in RBSU showed incorrect information after configurating bifurcation.

Addressed an issue where system may encounter RSOD after enrollment of an improper certfifcate.

Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

Addressed a secure boot database synchronizing issue via Redfish API.

Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

Addressed an issue where updating NVMe-oF initiator name would not take effect.

Known Issues: